POLICE ACCESSORIES
INTEGRAL WORK SOLUTIONS
Phones: +52 (55) 57 69 49 62 / +52 (55) 57 69 49 77
INTEGRAL WORK SOLUTIONS
Phones: +52 (55) 57 69 49 62 / +52 (55) 57 69 49 77
We offer products of the highest quality in Auto Parts, we are the only company at a national level that has the support of the assembly plants, in terms of manufacturing and installation of our accessories, so we do not affect the properties or the guarantee of the vehicles.
All our products are designed specifically for the requested vehicle manufactured with a Plate, Sheet and Tubular AST-A-36 finished with the best surface finish with electrostatic powder polyester paint and high resistance to impact and UV resistance.
| PUSH BUMPER |
 |
|
Manufactured with steel supports anchored directly to the chassis of the unit and structural steel core completely drowned in a main body of high strength polyurethane (rough use), thus allowing greater absorption of impact energy and to perform the thrust function on any Surface of the push bumper without causing damage to the unit
Thrust capacity of 3642.34 kg With special steel brackets to install front lights and LED codes It includes the institutional acronyms of its preference in the upper front part of the body under the relief and inlaid in stainless steel to avoid cloning finished in semi-gloss black Installation in any type of vehicle sedan, pick up, SUV, truck, etc. |
| REAR WINDOW PROTECTIONS |
 |
|
Internal protections to guarantee the level of the area of detainees, made of steel sheet cut with a laser to avoid edges and put at risk the occupants
Includes the institutional acronomys of your preference Semi-gloss black finish Installation in any type of vehicle sedan, pick up, SUV, truck, Etc. PARTITION SCREENS Pred internal metal especially designed to assemble inside the unit according to the design of the plant, and thus ensure the separation between officers and detainees It has handcuff rings to immobilize detainees installation in any type of vehicle, pick up, SUV, truck, ETC. |
| HARD FLOORS AND SEATS |
 |
|
(To facilitate cleaning and hygiene inside the vehicle)
Set of protective floors, seats, and backrest, installed on the floor and in place of the rear seat of the unit's floor Made of polyurethane and fiberglass with a special mold Finished in semi-gloss black and white respectively Special material with a drain towards the outside of the unit to facilitate cleaning and increase hygiene avoiding odors and body fluids that may affect the health of the occupant. installation in any type of vehicle, pick up, SUV, truck, ETC. |
| SPECIAL SUPPORT FOR ELECTRONIC EQUIPMENT |
 |
|
A special sliding metal-mechanical system installed in the trunk of the vehicle
For the installation of all the brains of the equipment of the visual-acoustic and video communication system of the unit. without losing the useful space of the trunk Protects unauthorized handling equipment thanks to its double sheet metal banking system, in addition to serving as a heat sink for these systems Finished in semi-gloss black Installation in any type of vehicle Sedan. |
| COMMAND ROLLBAR STRUCTURE |
 |
|
Steel tubular structure with bent frames with CNC machinery, crossbeams, and stringers of the same tubular.
With special brackets for fixing to the plate of the plate and steel profile vehicle Includes tube rails and moorings for the canvas in the position and diameter of your preference This structure can be from 1 to 3 frames in size and position according to the desired design Finished in semi-gloss black Installation in any type of vehicle pick up. |
| MACHINE GUN HOLDER (AFUSTE) |
 |
|
Mechanism to mount a long gun (SEDENA, SEMAR, PF, ETC,) on top of the rollbar installed in a pick-up
Made with steel plate base and welded bushing for 360 horizontal rotation with a bronze insert to assemble the body arrow The body is made of steel plate and bronze bushings for INOX steel bolts, for a 90 vertical turn Features a special double diameter steel arrow Includes a box for mounting and feeding the ammunition It has a telescopic system to adjust the height in three different positions every 5cm This submachine gun can be designed for any model of long weapon Finished in semi-gloss black Installation in any type of pick-up vehicle. |
| CANVAS COVERS STRUCTURE |
 |
|
Plastic tarpaulin with a nylon fabric arrangement of heavy transparent mica in the part attached to the medallion, lateral closures, lateral, front and top fixings Option to fix it to the rollbar structure with eyelets and Piola or with "contactel" as desired Optional can include rear doors with glass and central lock Common colors light blue, navy blue and black can be manufactured in the desired color Installation in any type of pick-up vehicle. STEP BACK FENDER Step to facilitate ascent and descent to the punt of a pickup Made with anti-skid steel sheet, with steel plate supports and ptr. installation in any type of vehicle pick-up. |
| CENTRAL BANKING |
 |
|
Rear bench with or without backrest for elements
Made of steel tube, seat and back of multi-perforated steel sheet in laser for ventilation Includes handle holder tube Finished in semi-gloss black Installation in any type of pick-up vehicle Optional: Padded seat and backrest Space for tool under the seat with caps with sheet metal and automotive pistons In the endorsement institutional acronyms that are desired laser cut. |
| CONTROL CONSOLE |
 |
|
Console for the installation of the control panels of the turret, radios, and services. Made of steel sheet with different covers for radio installation, switches, siren micro output, etc. Finished in semi-gloss black Installation in any type of vehicle sedan, pickup, SUV, truck, etc. Optional: Collapsible padded elbow Cover with 2 cup holders Institutional acronyms that are desired, cut with a laser. |
| PUSH BUMPER |
|
Manufactured with steel supports anchored directly to the chassis of the unit and structural steel core completely drowned in a main body of high strength polyurethane (rough use), thus allowing greater absorption of impact energy and to perform the thrust function on any Surface of the push bumper without causing damage to the unit
Thrust capacity of 3642.34 kg With special steel brackets to install front lights and LED codes It includes the institutional acronyms of its preference in the upper front part of the body under the relief and inlaid in stainless steel to avoid cloning finished in semi-gloss black Installation in any type of vehicle sedan, pick up, SUV, truck, etc. |
| REAR WINDOW PROTECTIONS |
|
Internal protections to guarantee the level of the area of detainees, made of steel sheet cut with a laser to avoid edges and put at risk the occupants
Includes the institutional acronomys of your preference Semi-gloss black finish Installation in any type of vehicle sedan, pick up, SUV, truck, Etc. PARTITION SCREENS Pred internal metal especially designed to assemble inside the unit according to the design of the plant, and thus ensure the separation between officers and detainees It has handcuff rings to immobilize detainees installation in any type of vehicle, pick up, SUV, truck, ETC. |
| HARD FLOORS AND SEATS |
|
(To facilitate cleaning and hygiene inside the vehicle)
Set of protective floors, seats, and backrest, installed on the floor and in place of the rear seat of the unit's floor Made of polyurethane and fiberglass with a special mold Finished in semi-gloss black and white respectively Special material with a drain towards the outside of the unit to facilitate cleaning and increase hygiene avoiding odors and body fluids that may affect the health of the occupant. installation in any type of vehicle, pick up, SUV, truck, ETC. |
| SPECIAL SUPPORT FOR ELECTRONIC EQUIPMENT |
|
A special sliding metal-mechanical system installed in the trunk of the vehicle
For the installation of all the brains of the equipment of the visual-acoustic and video communication system of the unit. without losing the useful space of the trunk Protects unauthorized handling equipment thanks to its double sheet metal banking system, in addition to serving as a heat sink for these systems Finished in semi-gloss black Installation in any type of vehicle Sedan. |
| COMMAND ROLLBAR STRUCTURE |
|
Steel tubular structure with bent frames with CNC machinery, crossbeams, and stringers of the same tubular.
With special brackets for fixing to the plate of the plate and steel profile vehicle Includes tube rails and moorings for the canvas in the position and diameter of your preference This structure can be from 1 to 3 frames in size and position according to the desired design Finished in semi-gloss black Installation in any type of vehicle pick up. |
| MACHINE GUN HOLDER (AFUSTE) |
|
Mechanism to mount a long gun (SEDENA, SEMAR, PF, ETC,) on top of the rollbar installed in a pick-up
Made with steel plate base and welded bushing for 360 horizontal rotation with a bronze insert to assemble the body arrow The body is made of steel plate and bronze bushings for INOX steel bolts, for a 90 vertical turn Features a special double diameter steel arrow Includes a box for mounting and feeding the ammunition It has a telescopic system to adjust the height in three different positions every 5cm This submachine gun can be designed for any model of long weapon Finished in semi-gloss black Installation in any type of pick-up vehicle. |
| CANVAS COVERS STRUCTURE |
|
Plastic tarpaulin with a nylon fabric arrangement of heavy transparent mica in the part attached to the medallion, lateral closures, lateral, front and top fixings Option to fix it to the rollbar structure with eyelets and Piola or with "contactel" as desired Optional can include rear doors with glass and central lock Common colors light blue, navy blue and black can be manufactured in the desired color Installation in any type of pick-up vehicle. STEP BACK FENDER Step to facilitate ascent and descent to the punt of a pickup Made with anti-skid steel sheet, with steel plate supports and ptr. installation in any type of vehicle pick-up. |
| CENTRAL BANKING |
|
Rear bench with or without backrest for elements
Made of steel tube, seat and back of multi-perforated steel sheet in laser for ventilation Includes handle holder tube Finished in semi-gloss black Installation in any type of pick-up vehicle Optional: Padded seat and backrest Space for tool under the seat with caps with sheet metal and automotive pistons In the endorsement institutional acronyms that are desired laser cut. |
| CONTROL CONSOLE |
|
Console for the installation of the control panels of the turret, radios, and services. Made of steel sheet with different covers for radio installation, switches, siren micro output, etc. Finished in semi-gloss black Installation in any type of vehicle sedan, pickup, SUV, truck, etc. Optional: Collapsible padded elbow Cover with 2 cup holders Institutional acronyms that are desired, cut with a laser. |
Contact 
Direction: TRES ANEGAS 420, COL. NUEVA INDUSTRIAL VALLEJO, DEL. GUSTAVO A. MADERO, C.P. 07700 Our phones are: +52 (55) 57 69 49 62 / +52 (55) 57 69 49 77 ventas@police-accessories.com 
|
|
Contact
Direction: TRES ANEGAS 420, COL. NUEVA INDUSTRIAL VALLEJO, DEL. GUSTAVO A. MADERO, C.P. 07700 Our phones are: +52 (55) 57 69 49 62 / +52 (55) 57 69 49 77 ventas@police-accessories.com
|
